Su carrito de compras está vacío
 
English Polski Spanish 
Buscar un manual
 

(p.Ej. AA-V20EG JVC, ZX-7 Sony)
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Usuarios conectados
Actualmente hay 5790 visitantes online.
Productos
Información
Destacado
Inicio >> HITACHI >> CPX980W Manual de Servicio
 
 0 artículo(s) en Su carrito 

HITACHI CPX980W
Manual de Servicio


¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!
  • Contiene diagramas del circuito
  • Descargable
  • Formato PDF
  • Manual completo
  • Idiomas: English
Precio: $4.99

Descripción del HITACHI CPX980W Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo general contienen diagramas de circuitos, tarjetas de circuitos impresos, consejos para reparación, diagramas de cableado, diagramas de bloque y lista de refacciones. El Manual de Servicio (a veces llamado Manual de Reparación) es usado principalmente por los técnicos.

Si tan solo quiere saber cómo utilizar su televisión, reproductor de vídeo, reproductor de mp3, etc. Quizá lo que necesita es el Manual del Propietario. Después de colocar la orden le enviaremos las instrucciones de descarga a su dirección de e-mail.

The manual is available in languages: English

Not yet ready
You must purchase it first

Opiniones de los clientes
No hay comentarios de productos.

TEXT_PDF_SNIPPET
There shall be no slack in the wire in this area. The excess wire shall be folded and tucked under (which will prevent the wire from getting tangled in the upper cover).

The installation of the flexible cable shall be subject to the drawing in the bottom right corner of this sheet.
EPBX

EPGX

Flexible cable (G panel)
CNRM SP.R/SP.L LSW2

ERM2

EFZ1

PWB DRIVE ECN3

CNRM

26
The ECN1/ECN2 wires shall be laid so that the excess wires shall be laid out as shown in the figure below. ECN1 ECN2 Terminal board PWB DRIVE PWB RGB
Particular care shall be taken not to bend the wires when laying out them.

PWB DRIVE

Screw Washer CNSG Particular care shall be taken to prevent the CNSG/CNDS2 from getting entangled in the upper cover when mounting the cover. The excess CNSG wire shall be tucked under the PWB DRIVE.

The CNSG shall be secured to the PWB DRIVE with a screw.

CNDS2

Upper cover
ECN1 ECN2 EDS2 CNSG

EDI2

EDI1

ESW1

The installation of the flexible cable shall be subject to the drawing in the bottom right corner of this sheet. It shall be securely fitted Flexible cable to PWB FAN G01. (R panel) ERM1
EDI3 EPRX SP.L SP.R

ESW2 CNSW PAS3

Wire clamp

PWB R/C

PWB KEYBOARD

Particular care shall be taken to prevent the wire stopper from being twisted on the board. Flexible cable (B panel) The ECN3 shall be connected to the EMD1 prior to securing the PWB DRIVE. In addition, the installation of the flexible cable shall be subject to the drawing in the bottom right corner of this sheet. PWB DRIVE
EMD1 LSW1

The wire clamp shall be secured with a wire stopper to prevent it from moving.

CNFZ

Fan cover

PWB TEMP
ECN3 ETEM

POWER UNIT (BALLAST)
PAS6

Push the slack in the ECN3 cable between the ballast and PWB DRIVE. POWER UNIT (BALLAST) EMD1

Purse lock 8

The connectors for the ballast and power fan shall be clamped to the fan cover with a purse lock.

The installation of the flexible cable shall be subject to the drawing shown below. (1) Insert the flexible flat cable securely into the connector base. (Particular attention shall be paid to the inserting direction as this connector 1 has contacts on its underside). (2) Move the hinge in the arrow Flexible flat cable direction to securely lock it.

2

Connector base

Wiring for PWB DRIVE Mounting

Quizás también quiera comprar

$4.99

CPX980W HITACHI
Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como …
>
Parse Time: 0.14 - Number of Queries: 100 - Query Time: 0.036