Su carrito de compras está vacío
 
English Polski Spanish 
Buscar un manual
 

(p.Ej. AA-V20EG JVC, ZX-7 Sony)
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Usuarios conectados
Actualmente hay 5781 visitantes online.
Productos
Información
Destacado
Inicio >> HITACHI >> CPX1402MS Manual de Servicio
 
 0 artículo(s) en Su carrito 

HITACHI CPX1402MS
Manual de Servicio


¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!
  • Contiene diagramas del circuito
  • Descargable
  • Formato PDF
  • Manual completo
  • Idiomas: English, German, French
Precio: $4.99

Descripción del HITACHI CPX1402MS Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo general contienen diagramas de circuitos, tarjetas de circuitos impresos, consejos para reparación, diagramas de cableado, diagramas de bloque y lista de refacciones. El Manual de Servicio (a veces llamado Manual de Reparación) es usado principalmente por los técnicos.

Si tan solo quiere saber cómo utilizar su televisión, reproductor de vídeo, reproductor de mp3, etc. Quizá lo que necesita es el Manual del Propietario. Después de colocar la orden le enviaremos las instrucciones de descarga a su dirección de e-mail.

The manual is available in languages: English, German, French

Not yet ready
You must purchase it first

Opiniones de los clientes
No hay comentarios de productos.

TEXT_PDF_SNIPPET
ALIGNMENT AND ADJUSTMENTS
General Alignment Instructions
1.Usually, a color CCTV needs only slight touch-up adjustment upon installation. Check the basic characteristics such as height, horizontal and vertical sync and focus. 2.Observe the picture for good black and white details. There should be no objectionable color, shading; if color shading is present,demagnetize, perform purity and convergence adjustments described below. 3.Use the specified test equipment or its equivalent. 4.Correct impedance matching is essential. 5.Avoid overload. Excessive signal from a sweep generator might overload the front-end of the CCTV SET. When inserting signal markers, do not allow the marker generator to distort test results. 6.Connect the CCTV SET only to an AC power source with voltage and frequency as specified on the backcover nameplate. 7.Do not attempt to connect or disconnect any wires while the CCTV SET is turned on. Make sure that the power cord is disconnected before replacing any parts. 8. To protect against shock hazard, use an isolation transformer.

Automatic Degaussing
A degaussing coil is mounted around the picture tube, so that external degaussing after moving the CCTV SET should be unnecessary. But the receiver must be properly degaussed upon installation. The degaussing coil operates for about 1 second after the power is switched ON. If the set is moved or turned in a different direction, the power should be OFF for at least 10 minutes. If the chassis or parts of the cabinet become magnetized, poor color purity will result. If this happens, use an external degaussing coil. Slowly move the degaussing coil around the faceplate of the picture tube and the sides and front of the receiver. Slowly withdraw the coil to a distance of about 6 feet before turning power OFF. If color shading persists, perform the following Color Purity and Convergence adjustments.

10

Quizás también quiera comprar

$4.99

CPX1402MS HITACHI
Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como …
>
Parse Time: 0.174 - Number of Queries: 101 - Query Time: 0.042