Su carrito de compras está vacío
 
English Polski Spanish 
Buscar un manual
 

(p.Ej. AA-V20EG JVC, ZX-7 Sony)
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Usuarios conectados
Actualmente hay 5889 visitantes online.
Productos
Información
Destacado
Inicio >> HITACHI >> 28LD5200E Manual de Servicio
 
 0 artículo(s) en Su carrito 

HITACHI 28LD5200E
Manual de Servicio


¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!
  • Contiene diagramas del circuito
  • Descargable
  • Formato PDF
  • Manual completo
  • Idiomas: English
Precio: $4.99

Descripción del HITACHI 28LD5200E Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo general contienen diagramas de circuitos, tarjetas de circuitos impresos, consejos para reparación, diagramas de cableado, diagramas de bloque y lista de refacciones. El Manual de Servicio (a veces llamado Manual de Reparación) es usado principalmente por los técnicos.

Si tan solo quiere saber cómo utilizar su televisión, reproductor de vídeo, reproductor de mp3, etc. Quizá lo que necesita es el Manual del Propietario. Después de colocar la orden le enviaremos las instrucciones de descarga a su dirección de e-mail.

The manual is available in languages: English

Not yet ready
You must purchase it first

Opiniones de los clientes
No hay comentarios de productos.

TEXT_PDF_SNIPPET
28LD5200E (PW1L)

Item

AUTOMATIC SIGNAL LEVEL ADJ USTMENT �RGB (1)
Procedure (1) Select RGB2 and enter the service adjustment mode. (2) Select No.740 �RGB Amp. Gain ADJ.� and press OK button for more than 2 seconds to start the adjustment. It will complete the adjustment after the OSD of �AUTO MODE� disappeared.

Preparation (1) Input the adjustment signal of VGA (60Hz) format into RGB2 [D-sub] input terminal. the adjustment signal
The signal level of black area should be pedestal level. This signal must not be inserted characters etc.

Black White 0.7V

[Note] Never adjust without use of the specified signal. If that were done by mistake, the picture would become abnormal in black level, contrast and color. In this case, it will be recovered by re-adjustment in the specified way.

Item

AUTOMATIC SIGNAL LEVEL ADJ USTMENT �RGB (2)
Procedure (1) Select AV1 and enter the service adjustment mode. (2) Select No.740 �RGB Amp. Gain ADJ.� and press OK button for more than 2 seconds to start the adjustment. It will complete the adjustment after the OSD of �AUTO MODE� disappeared. (3) Select No.741 �RGB Amp. Gain ADJ.� and press OK button for more than 2 seconds to start the adjustment. It will complete the adjustment after the OSD of �AUTO MODE� disappeared.

Preparation (1) Input the adjustment signal of 576p or 480p format into AV1 input terminal. the adjustment signal
The signal level of black area should be pedestal level. This signal must not be inserted characters etc.

Black White 0.7V

[Note] Never adjust without use of the specified signal. If that were done by mistake, the picture would become abnormal in black level, contrast and color. In this case, it will be recovered by re-adjustment in the specified way.

16

Quizás también quiera comprar

$4.99

28LD5200E HITACHI
Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como …
>
Parse Time: 0.179 - Number of Queries: 103 - Query Time: 0.039